Search results for " natural fibre"
showing 10 items of 12 documents
Thermal kinetics for the energy valorisation of polylactide/sisal biocomposites
2018
[EN] The thermal stability and decomposition kinetics of PLA/sisal biocomposites was discussed to evaluate the suitability of their use in energy recovery processes such as pyrolysis and combustion. The influence of the addition of sisal up to 30%wt, the presence of coupling agent, and the atmosphere of operation, i.e. inert or oxidative was discussed by means of multi-rate linear non-isothermal thermogravimetric experiments. All biocomposites showed a mean high heating value of 15 MJ/kg indicating their suitability for energy recovery processes. The thermal requirements of PLA/sisal decomposition were assessed in terms of onset decomposition temperature and apparent activation energy. A mi…
Thermal and thermo-oxidative stability and kinetics of decomposition of PHBV/sisal composites
2017
The decomposition behaviours of composites made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and sisal were assessed in terms of thermal stability and decomposition kinetics, under inert and oxidative conditions, by means of multi-rate linear non-isothermal thermogravimetric experiments. A statistical design of experiments was applied to study the influence of the addition of sisal (0-10-20-30%wt), the presence coupling agent (Yes/No) and the applied conditions of work (inert or oxidative). An improvement of the thermal and thermo-oxidative stability of PHBV with the addition of sisal was observed for all cases. An accurate methodology based on iso-conversional methods was applied…
Failure mechanisms of flax/epoxy laminates with open hole: a failure map
2017
Aim of this paper is the investigation of the pin/hole contact stress and failure mechanisms of flax/epoxy composite laminates underwent to tensile bearing tests. In particular, the maximum loads and failure modes are evaluated at varying joint geometry. In order to optimize the use of composite materials in structural applications, an experimental failure map, identifying main failure modes of mechanically fastened joints, is obtained by evaluating failure modes (i.e., net tension, shear out, cleavage and bearing) as a function of the pin diameter and the position of the hole from the free edge of the laminate. Main goal of this paper is give a simple experimental methodology to support th…
Durability of Basalt/Hemp Hybrid Thermoplastic Composites
2019
The Achilles heel of thermoplastic natural fibre composites is their limited durability. The environmental degradation of the mechanical properties of hemp and hemp/basalt hybrid-reinforced high-density polyethylene (HDPE) composites has been investigated with a special focus on the effects of water ageing and accelerated ageing, including hygrothermal and UV radiation. Modification of the matrix was carried out using a maleic anhydride high-density polyethylene copolymer (MAPE) as a compatibilizer. Hybridization of hemp fibres with basalt fibres and the incorporation of MAPE were found to significantly decrease the water uptake (up to 75%) and increase the retention of mechanical propertie…
Modelling the structure-property relationships of high performance PBAT-based biocomposites with natural fibers obtained from Chamaerops humilis dwar…
2022
Two fibrous fillers were achieved from stalks and leaves of Chamaerops humilis dwarf palm and tested as reinforcing agents for poly(butylene adipate co-terephthalate) (PBAT)-based composites. The influence of filler type and content on the morphomechanical properties of the green composites was assessed. The outcomes of tensile tests pointed out that both fillers are strong candidates to overcome the two main limiting aspects of PBAT, that is, the lack of both stiffness and cost-effectiveness, while preserving its stretchability and environmental sustainability. The remarkable stiffness increments (up to 300%), combined with fair retention of stretchability (33%) and doubled resistance, led…
A systematic literature review on less common natural fibres and their biocomposites
2018
Abstract Interest in utilization of renewable resources is increasing because of public's environmental awareness and economic considerations. Lignocellulosic fibres have already attracted growing attention as reinforcement of polymeric matrices instead of synthetic ones (mainly glass) from the academic and industrial fields. In addition to kenaf, hemp, sisal, flax and jute, which are the subject of extensive investigations for composite applications since the 1970s, in the last years several researchers suggested the use of less common natural fibres, due to their low cost and availability. This paper reviews the extraction methods, chemical, morphological, thermal and mechanical propertie…
Effects of natural fibres reinforcement in lime plasters (kenaf and sisal vs. Polypropylene)
2014
Nowadays the tendency to realize environment-friendly products is becoming more widespread to ensure sustainable and smart development. The synthetic fibres, frequently used, are harmful to the environment because they are non-degradable and non-renewable. Their use has resulted in an increase of oil consumption. Therefore, the possibility of replacing them with natural fibres becomes increasingly concrete confirmed by the researches and investigations carried out. In this work three lime based plasters were prepared and analysed to evaluate the influence on their performance of different fibres used as reinforcement. In particular each plaster was realised by adding to the mortar the same …
Environmentally Friendly Composites and Surface Treatments for Metal-to-Composite Hybrid Joints for Marine Application
2022
In this study, the use of natural fibres (flax and basalt) in combination with a recyclable epoxy matrix based on cleavable amines is suggested for improving the sustainability of marine industry. In addition, a new and eco-friendly anodizing process based on tartaric sulfuric acid solution (TSA) and a pore widening step in a NaOH aqueous solution was carried out on aluminium alloy (AA5083) to evaluate its effect on the adhesion strength and damage tolerance after low velocity impact of co-cured adhesive joints with a basalt fibre reinforced and recyclable laminate. The durability in marine environment was simulated by exposing samples to salt-fog spray conditions over a period of 90 days. …
Mode I translaminar fracture toughness of high performance laminated biocomposites reinforced by sisal fibers: Accurate measurement approach and lay-…
2022
Abstract The present work performs a systematic experimental analysis of the translaminar fracture behavior of high performance biocomposites constituted by green epoxy reinforced by sisal fibers, by varying the main influence parameters as fiber concentration and lay-up. Despite the corrective function properly introduced to take into account the anisotropy as well as the use of the equivalent crack length, the study shows that the LEFM does not give accurate estimations of the fracture toughness, because the extension of the near tip damaged zone is higher than the singular dominated one. Accurate estimations can be obtained instead by the proposed modified area method that takes into acc…
Hydrolytic degradation of PLA/Posidonia Oceanica green composites: A simple model based on starting morpho-chemical properties
2021
Abstract In this work, we studied the degradability of PLA-based biocomposites containing Posidonia Oceanica flour at different loading levels and aspect ratios. Hydrolytic tests were carried out in neutral (pH = 7.4) and alkaline (pH = 10) environment. Time-dependent evolution of some key features, including residual mass and solution uptake, was monitored, and correlated with the changes observed in both morphology and chemical structure of the matrix. The results pointed out that biocomposites degraded much faster than neat PLA in both conditions, up to lose 70% of their initial weight after 1000 h immersion. A complex mechanism was unveiled, evidencing the crucial role of the fillers, c…